Home | Intranet | Sitemap | Contact Us
 
 
RCM Series FRM Series PM Series CM Series RB Series XE Series PVC Fills Pultruded Profiles
 
 
 
 

Stronglite offers a wide range of edge folded PVC fill products to meet specific applications. Our standard fill products meet the requirements used in counterflow cooling towers. Our fills are with both edges folded and achieve high surface area for given volume.

Stronglite PVC Fills are made by continuous forming and offer minimum resistance to airflow, providing more cooling by lower power consumption. They have uniform thickness throughout.

Durable folded edges provide strength at critical locations on the fill. The fills are easy to glue at site thus saving on transportation costs.
Technical Data

Characteristics

Units

12 mm

19 mm

27 mm

Cooling Towers Application

 

Counterflow

Counterflow

Counterflow

Flute height

mm

12

19

27

Longitudinal pitch

mm

38

50

70

Spiral angle

°(degree)

28

28

28

Surface area per unit volume

m²/m³

243

157

120

Maximum continuous
Operating temp.

°C
°F

55
131

55
131

55
131

Standard Fill Sheet  Finished Thickness

mm

0.3

.3

0.3
 
Salient Features
  * Continous Forming.
  * Double Edge Folding.
  * Uniform Thickness.
  * Available in sheet width of 300mm & 600mm.
 
Advantages
  *
Uniform Thickness : Uniform thickness provides long retention time & also provides uniform time for heat transfer.
  *
Continous Forming : Continous forming process is adopted by us where one end of fill is always free & material supply from other end is always available during the time of formation. Additional requirement of raw material is met hence no thinning effect takes place at crests & troughs.
  *
Double Edge Folding : OUR manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against rough handling during installation & maintenance. It also protects the fill from erosion.
  *
Longer Length : Longer length allows the water to be inside the fill media for maximum time. It also facilitates to decrease the number of support beam thus inturn reduces the pressure drop & also reduces the cost of construction
TOP
 
Designed & Developed by K Webmaker™